I am looking for a micro pave band or thin channel set band with nice detail or perhaps diamonds in the prong/setting that holds the main diamond. Nothing to ornate or over the top… any suggestions?

For some reason my ring size is somewhere between a 5 and 5.5. My boyfriend would like to buy me an engagement ring that has small diamonds, pave, all the way around the band. He was told that these rings cannot be sized after purchase. Is it better to go with the 5, which is quite snug, or the 5.5, which is a bit loose? It would not be so loose as to fall off, but it could shift from side to side.

i found the ring i want it is a pave set ring but its alot of $$$ and was wondering if anyone new of any other sites that have them for a little cheaper.

http://www.adiamor.com/R-1368-R2825-1.htm

this is it except the rings ct is .80 not the one shown….

If you’re engagement ring shopping (or dreaming) you’ve encountered several different styles of rings. If you had to choose between the Halo Diamond Engagement Ring (a round, oval or cushion-cut diamond encircled by a "halo" of micro pave diamonds) or a traditional solitaire diamond ring, which would you select?

Engagement Ring
Center Stone Color: G
Clarity: IF
Center tone Cutting: Marquise Cut
Setting Type: Prong Setting
Number of Stone: 1 stone
Carat Weight: 2.00 ct x 1 stone
Side Stone Color: G
Clarity: IF
Side tone Cutting: Round Brilliant Cut
Setting Type: Channel Setting
Number of Stone: 8 stones
Carat Weight: 0.03 ct x 8 stones
Total Carat Weight: 2.24 ct. tw
Material: 18K Gold Plated, Simulated Diamond
Size: Size 7 We cannot exchange the size due to limited quantity! Please search by size using the link below!
Ring Width: 2.5 mm
Quantity: 1
Product ID: 1142s7
Condition: 100% Brand New
————————————————
Wedding Ring Set

Engagement Ring
Color: G
Center Stone Cutting: Round Brilliant Cut
Setting Type: Prong Setting
Carat Weight: 2.25 cts
Side Stone Cutting: Round Brilliant Cut
Setting Type: Pave Setting
Carat Weight: 0.02 ct. x 18 stones
Ring Width: 4.5 mm

Wedding Band
Stone Cutting: Round Brilliant Cut
Setting Type: Pave Setting
Carat Weight: 0.02 ct. x 18 stones
Material: 18K White Gold Plated, Simulated Diamond
Size: Size 7 We cannot exchange the size due to limited quantity! Please search by size using the link below!
Carat Total Weight: 2.97 ctw
Ring Total Width: 9 mm
Quantity: 1 set – 2 rings
Product ID: 3058s7
Condition: 100% Brand New

My girlfriend thinks it is pretty, but I want to know if it is any good before I buy it. Thanks.

This is from the site. It says under wedding band that it is simulated diamonds, but under engagement ring, it doesn’t say. What do you think?

Engagement Ring

Color: G
Center Stone Cutting: Round Brilliant Cut
Setting Type: Prong Setting
Carat Weight: 2.10 cts
Side Stone Cutting: Baguette Cut
Setting Type: Channel Setting
Carat Weight: 0.18 ct. x 2 stones
Side Stone Cutting: Round Brilliant Cut
Setting Type: Pave Setting
Carat Weight: 0.03 ct. x 4 stones
Wedding Band

Stone Cutting: Round Brilliant Cut
Setting Type: Pave Setting
Carat Weight: 0.05 ct. x 11 stones
Material: 18K White Gold Plated, Simulated Diamond
Size: Size 8 We cannot exchange the size due to limited quantity! Please search by size using the link below!
Carat Total Weight: 3.13 ctw
Quantity: 1 set – Two rings
Ring Total Width: 4.5 mm

I received a 3 stone, Princess Cut, platinum and diamond ring with pave' diamonds around the side, as an engagement ring. I'm having a hard time trying to find a complimentary wedding ring to go with it. Can anyone help?

Maybe this is a silly question but for the life of me (and my future fiancé), we can’t figure it out!

We will be getting an engagement ring from Leon Mege. I was set on the pave band with the 3 rows of pave as opposed to the single row. On his website, an example would be the R908.

If I were to get the single row pave engagement band, then a single row pave wedding band would be flush with the engagement band. What the heck do people do when they get the 3 row pave engagement ring bands? Obviously when you have a strip of diamonds down the middle and both sides of the engagement ring band, and the same on a matching wedding band, won’t the diamonds always be rubbing against each other??? The single row bands have metal on the sides so they can come up right next to each other so how does it work with the 3 rows?? I’ve seen plenty of pictures of bridal sets with 3 rows on both bands, but never a picture of how it looks on someone actual finger?! And the ones I do see on pricescope, usually people write “pave bands” instead of “single row” or “3-row pave bands” so I can’t tell in the picture if I’m looking at single or 3-row.

I do see that Leon has a metal band that can go in between the two rings in his additional photos of the R908 if you wanted matching bands. #1- I don’t like it, and #2- wouldn’t the metal just get scratched??

Is there any way to have these rings sit flush with each other, or even have them welded together?

Wouldn’t having 3 rows on the engagement band and the wedding band defeat the purpose if the two rows that touch each other are basically now covered up by each other?? Isn’t that a waste of money on extra diamonds or am I just not envisioning it right???
Just to clarify I am talking about the pave BANDS only. The setting of the E-ring is a single stone solitaire on a pave band. Some bands have the single pave strip, in other words, a row of very small diamonds around the band. The one I am getting has three rows of very small diamonds around the band: one down the middle and one down each side… the pave diamonds curve with the band. The wedding band is the same deal and the pave diamonds curve with the band. So just wondering how that works when they are sitting right next to each other on the finger.

I was just wondering, here a pictures of my dream wedding EVERYTHING.

This is the engagement ring that I doubt I could ever afford but would love to have: http://www.novori.com/images/white-gold-pave-set-engagement-setting.jpg

Wedding Band set: http://www.mondera.com/images/learn/main_wedding_bands.jpg

Dress: http://pattysbridal.com/images/lowres%20pics/inter%20store%20big/Picture%20072.jpg

ok so I took my engagement ring to the jewelers because I wanted the diamond lowered… so in order to do that they had to put a new head on it… well when I got the ring back this past Tuesday night I was just so happy to have it back again I didn’t even inspect it…

So my fiance and I are grocery shopping after picking it up and I was looking at my ring and two things caught my eye… ONE… the freaking new head that was put on there was glued or something because you could see the freaking glue underneath the head of the mounting if you look closely… I mean it’s not totally visible, but I can see it and it just looks cheap to me!

BUT what was visible was it looked like they replaced one of my diamonds on my ring! My ring is a pave setting and it has 6 diamonds on each side of the main diamond… well on the right side of the main diamond, the 2nd diamond was BROWN!!! It was completely visible!!!!!!

So we took it back the next day and now it’s the 3rd time I’m sending my ring back…. I’ve only been engaged for 6 months…

So when we took it back, the lady that we’ve been dealing with was SUPERRRR pissed that their jeweler did such a horrible and sloppy job. Apparently what looked like a brown diamond, was the regular diamond that was in there before, but the jeweler got solder on the bottom of it and it made it look a different color… and the glue that was visible, was also solder that she didn’t file down…. I mean the ring looked like crap. I so badly just want to have my fiance ask for his money back so we can go somewhere else where they have a reputable jeweler… but we’ve had the ring since June… I’m not sure if their going to do that… it’s just a nighmare. The sucky part is that the customer service is amazing and we don’t want to go in there and raise hell…. But what else are we supposed to do?

We have had nothing but problems with it…When my fiance proposed to me the wedding band that came with the engagement ring was missing a diamond and he had the ring for a freaking day! Then when we went to turn in the band, they noticed that one of the side diamonds on my ering was about to fall out… so they fixed it but its also a messy solder job… I’m just so fed up! You think that paying almost ,000 for the freaking thing, it would last longer than 6 months!!! UGHHHH!!! I don’t know what to do!!

Is it too late to demand a new ring, but with the same diamond that we purchased? Or a refund to go somewhere else where we wont have this problem?

I mean this ring is supposed to last me my whole life, and it hasn’t even made it through 6 months and it’s already falling apart…..